Steam comes from the dome

If water vapor escapes from the capsule during the cleaning cycle, there is something preventing the dome from closing. It's probably a loose screw. We will tell you the steps you need to follow to solve this problem.

Estimated time : 5 min

Tool needed : Allen key 2.0

Step 1

Remove the effluent pan to prevent the dome from closing. Thus, you can work on the machine in complete safety.

The red LED lights up when the tray is removed.

2nd step

Look at the tall capsule and check that each screw is well tightened.

Step 3

Take a 2.0 allen key and retighten the unscrewed screw(s).

Once done, check that the dome closes properly by running a cleaning cycle.

I have completed all the steps